The DrySyn MULTI-E Kit comprises the base plate with heat resistant handle, 3 x 25 mL, 3 x 50 mL and 3 x 100 mL inserts for round bottom flasks. You can also buy these components separately to make up your chosen configuration of inserts. In addition, this base is suitable to use with the DrySyn MULTI-M and MULTI-S flask inserts and vial inserts, offering up to 27 reactions in parallel.
The DrySyn MULTI system converts any standard hotplate stirrer into a reaction block for 3 flasks of 10 mL – 100 mL, or up to 27 vials. Its modular system offers flexibility and is very compact with a small footprint that is just a little wider than an average hotplate stirrer.
The DrySyn MULTI-E base fits easily with any standard hotplate stirrer; round or rectangular and comes with a strong, heat resistant handle for safe lifting.
This MULTI system base allows 3 x flask or vial inserts to be used in parallel or 1 x insert to be used in the centre at a time.

Asynt, in conjunction with BioChromato (Japan), have developed the NEW DrySyn Spiral Evaporator which enables scientists to evaporate tubes directly in DrySyn reaction vial blocks up to 4 samples at a time.
Utilising the proven safety benefits of DrySyn to combine with the patented spiral plug evaporation technology from BioChromato originally used in the Smart Evaporator, the DrySyn Spiral Evaporator offers fast and effective parallel evaporation in tubes without solvent bumping. Use the system to rapidly concentrate even high boiling solvents such as DMSO, DMF and water in tubes, without heating to high temperatures.

The DrySyn MULTI-E Base converts any standard hotplate stirrer into a reaction block for 3 flasks of 10 mL – 100 mL, or up to 27 vials. Its modular system offers flexibility and is very compact with a small footprint.
The clever design allows fitment with any hotplate stirrer and comes complete with a heat resistant safety lifting handle.
Various kits are also available depending on your needs however this DrySyn MULTI-E starter kit includes the base and one each of 25/50/100 mL inserts.
You can of course purchase additional inserts of your chosen size.

The DrySyn MULTI-M converts any standard hotplate stirrer into a reaction block for 3 flasks of 10 mL – 250 mL, or for up to 27 vials.
Its modular system offers flexibility and is very compact with a small footprint. All DrySyn MULTI inserts are compatible with the MULTI-M base. In addition one Multi-S 500 mL flask can be used in the central position.
The DrySyn MULTI-M base design means that you can heat with any standard hotplate stirrer, round or rectangular, and is supplied with a heat resistant handle.
The base plate allows 3 x flask inserts to be used in parallel or 1 x insert to be used in the centre at a time.

The DrySyn MULTI-M Starter Kit is comprised of a base with heat resistant handle and a pack of 3 inserts to suit 250 mL round bottom flasks.
The MULTI-M base converts any standard hotplate stirrer into a reaction block for 3 flasks of 10 mL – 250 mL, or for up to 27 vials. The design means that you can heat with any standard hotplate stirrer, round or rectangular.
The DrySyn modular system offers flexibility and is very compact with a small footprint. All DrySyn MULTI inserts are compatible with the MULTI-M base. In addition one Multi-S 500 mL flask can be used in the central position.

DrySyn enables clean, safe synthesis without the hazards or problems associated with silicon oil baths or heating mantles. With no messy oil, heat resistant handles, and simple to configure range of inserts this system is world renowned. With heating rates the same as an oil bath there is no need to change your chemistry either.
DrySyn offers excellent value with reliable high performance levels without the high cost to the environment of using messy oil baths.
The DrySyn MULTI-S converts any standard hotplate stirrer into a reaction block for 3 flasks of 10 mL to 500 mL, or up to 27 vials. Its modular system offers flexibility and is very compact with a small footprint. In addition, all DrySyn MULTI and Multi-M inserts are compatible with the MULTI-S base.

With no hazardous and messy oil, the world renowned DrySyn system offers safe, clean synthesis and with heating rates the same as an oil bath, there’s no need to change your chemistry!
Every DrySyn base comes with heat resistant handles for safe lifting, and is suitable to use with the whole MULTI range of inserts to suit vials and round bottom flasks. The modular system offers great flexibility and is very compact with a small footprint.
DrySyn offers excellent value with reliable high performance levels without the high cost to the environment of using messy oil baths.
The DrySyn MULTI-S Starter Kit suits up to three 500 mL round bottom flasks in parallel, but you can use just one insert in the central position if desired.

The DrySyn Parallel Synthesis Kit provides a convenient, low cost solution for chemists wishing to conduct simple synthetic reactions with temperature control and magnetic stirring, but without the complications of reflux or inerting. With no messy oil baths required for heating this is a simple but effective tool for a modern and sustainable laboratory.
The DrySyn Parallel Synthesis kit is ideal for producing small, focused libraries of compounds.
This kit accommodates a range of standard reaction tubes and vials of different diameters.
It can also be upgraded to become a parallel reaction station using standard round-bottom flasks simply by using the appropriate DrySyn MULTI inserts. In this configuration, facilities like reflux and gas control can be added, as can directly driven stirring with the Asynt Vortex stirrer system.
The DrySyn MULTI-E base that is featured in this kit comes complete with a heat resistant handle for safe use in the laboratory.

The DrySyn Parallel Synthesis Starter Kit comprises three different sized inserts of your choice to suit your favourite vials and the MULTI-E 3 position base with heat resistant handle.
This new addition to our range of easy-to-use kits offers true versatility for your lab!

DrySyn Reaction Vial inserts can be used for up to 27 parallel heated or cooled reaction. Available in a wide range of sizes from stock, we can also custom make these to suit your specific needs. All DrySyn is engineered and manufactured in the UK.
The inserts are made with a variety of positions depending on size, and offer great versatility.
With several new additions to the range available as standard including 11.80 mm inserts for 2 mL HPLC sample vials, 27.40 mm inserts which will fit 20 mL Scintillation vials, and tapered 17.40 mm inserts which will fit Biotage tapered 0.5-2 mL microwave vials. See the “Specification” tab for the full list of stock sizes.

We are pleased to announce that we can now offer DrySyn Reaction Vial Starter Kit.
With so many standard sizes available from stock, you can now choose any three single blocks from the range to form a Starter Kit. You can see a complete list of these on the “specification” tab here online.
This particular kit is currently only available directly from Asynt.

The DrySyn MULTI range is designed for safe, clean synthesis for vials and flasks up to 500 mL size.
Whilst we offer convenient kits to suit various groups of sizes, you are also welcome to purchase any of these bases individually to allow totally flexible use of the system.
Supplied with a strong, heat resistant handle the base allows for simple clamping of up to three flasks simultaneously.
The DrySyn MULTI-E Base may be used for up to 3 x 100 mL flasks in parallel.
The DrySyn MULTI-M Base may be used for up to 3 x 250 mL flasks in parallel.
The DrySyn MULTI-S Base may be used for up to 3 x 500 mL flasks in parallel.

Perfect for safe heating and clamping of just one flask, or for heating one DrySyn Reaction Vial insert, the DrySyn UNO Base has a flat bottom with removable/re-position able feet making it suitable for use on any standard magnetic hotplate stirrer.
The DrySyn UNO Base, just like our MULTI position bases, comes complete with a heat resistant handle making it even more perfect for academia.
The robust solid anodised aluminium construction of the DrySyn range offers excellent performance without the need for messy and potentially hazardous oil baths.

The DrySyn MULTI range is designed to accommodate flasks from 5 mL to 100 mL, in addition to inserts which fit a wide range of vials.
Available in packs of 3 in any one size, these provide great flexibility in the lab. See the “Specification” tab for the full list of sizes available. Easy to use and quick to change, the DrySyn range of heating blocks offers safe, clean synthesis without the need to change your chemistry.
You may use these inserts on their own, situated directly upon a magnetic hotplate stirrer but ideally via the DrySyn MULTI Base. When used in parallel the DrySyn MULTI 3 Position Clamp provides a safe and simple means of clamping all three flasks at once.
The MULTI-M range is additionally suitable for 250 mL round bottom flasks, and the MULTI-S range for 500 mL round bottom flasks.

The DrySyn MULTI-M range is designed to accommodate flasks up to 250 mL, in addition to a wide range of vials.
Available in packs of 3 these 250 mL inserts provide great flexibility in the lab. Also available as part of the DrySyn MULTI-M Complete Kit, these are so simple to use and quick to change.
You may use these inserts individually, situated directly upon a magnetic hotplate stirrer but ideally via the DrySyn MULTI-M Base. When used in parallel the DrySyn MULTI-M 3 Position Clamp provides a safe and simple means of clamping all three flasks at once.
The MULTI range is additionally suitable for 5 mL – 100 mLl round bottom flasks, and the MULTI-S range for 500 mL round bottom flasks.

The DrySyn MULTI-S range is designed to accommodate flasks up to 500 mL, in addition to a wide range of vials.
Supplied in packs of 3, these 500 mL inserts provide great flexibility in the lab. Also available as part of the DrySyn MULTI-S Complete Kit, these are so simple to use and quick to change.
You may use these inserts individually, situated directly upon a magnetic hotplate stirrer but ideally via the DrySyn MULTI-S Base. When used in parallel the DrySyn MULTI-S 3 Position Clamp provides a safe and simple means of clamping all three flasks at once.
The MULTI range is additionally suitable for 5 mL – 100 mL round bottom flasks, and the MULTI-M range for 250 mL round bottom flasks.

The newest addition to our heating block line, the DrySyn NMR Tube Heating Block is perfect for safe, effective, uniform heating of up to 10 NMR tubes on a conventional hotplate stirrer.
With no need for complicated stacking arrangements in messy oil baths, this insert allows you to take your NMR tube straight off for sampling.
Ideal for catalyst screening experiments and reaction monitoring using NMR spectroscopy, the DrySyn NMR Tube Heating Block allows NMR tubes to become your new reaction vessel!
We have also been appointed UK distributor for Deutero and can provide NMR tubes at incredible prices, with no loss of quality.

Part of the DrySyn Reactors range from the Asynt chemists, the DrySyn OCTO 8 Position Reaction Station allows powerful magnetic stirring and heating, inert atmosphere and reflux, all with a tiny footprint.
This innovative design has been found incredibly useful for working volumes of up to 6ml and has been specified to allow the use of low-cost reaction tubes to save as much as possible on consumables for your lab.
Whilst brilliant for 8 parallel reactions, you can use up to 3 DrySyn OCTO Reaction Stations on just one standard magnetic hotplate stirrer therefore allowing up to 24 parallel reactions.
The MKII DrySyn OCTO has now been launched with some aesthetically pleasing updates at no additional cost to our customers! Take a look at our “videos” tab here for more information.

Part of the DrySyn reactors range from the Asynt chemists, the DrySyn OCTO-PLUS 3 x 8 Position Reaction Station allows powerful magnetic stirring and heating, inert atmosphere and reflux, all with a tiny footprint.
This innovative design has been found incredibly useful for working volumes of up to 6ml and has been specified to allow the use of low-cost reaction tubes to save as much as possible on consumables for your lab.
Use the DrySyn OCTO-PLUS for up to 24 parallel reactions on just one standard magnetic hotplate stirrer.

Now available as an alternative to the hugely popular DrySyn OCTO, the DrySyn OCTO Mini allows safe and easy sampling with disposable needles.
You can buy a conversion kit if you already own the DrySyn OCTO or wish to switch back and forth between the two handy options however this version comes set up for when sampling is preferred to reflux applications.

Now available as an accessory to the hugely popular DrySyn OCTO, the DrySyn OCTO Mini Conversion Kit allows safe and easy sampling with disposable needles.
This conversion kit is quick and easy to swap over from the standard DrySyn OCTO support and offers a simple solution for when sampling is preferred to reflux applications.

DrySyn Vortex overhead stirrer system offers our customers the ability to work with higher viscosity materials in parallel, where magnetic stirring is not strong enough or where materials could be damaged by the grinding effect of a magnetic stirring bar.
A mechanical gearbox converts the drive of one standard overhead stirrer motor into 3 shafts for powerful overhead stirring, with heating provided by any standard laboratory heating plate.
The DrySyn Vortex perfectly compliments the standard range of DrySyn MULTI inserts for round bottom flasks, from 100 mL up to 500 mL.
Analytical Innovations, previously located at the University of Huddersfield under the group name IPOS, examined the mixing capabilities of the DrySyn Vortex overhead stirrer system and concluded the instrument as a useful addition to any laboratory conducting parallel synthesis.

A new adaptation to the Asynt Vortex parallel overhead stirrer has been developed specifically to cater for the requirements of scientists who need to test new formulations and blends of ingredients in parallel in beakers.
The device is particularly relevant to blending and formulation scientists in the oil, cosmetics, cleansing and hygiene industries and is manufactured in the UK.

The DrySyn Snowstorm reactor offers an attractive solution to low temperature reaction chemistry.
Purging the dome with nitrogen / argon prevents the formation of ice around the reactors at sub-ambient temperatures.
Active temperature control from +150 oC to -30 oC permits unattended operation of up to 27 vials at any one time.
With a small bench top footprint, the DrySyn Snowstorm allows increased throughput and screening without taking up valuable fume hood space.
Our gallery images show the DrySyn SnowStorm reactor with both Grant and Julabo chillers.

The DrySyn SnowStorm MULTI offers active temperature control of your chemistry from ambient to -30°C.
The unattended operation of up to 3 x 100 mL reaction flasks combined with the small benchtop footprint allows you to increase throughput without taking up valuable fume hood space.
We have comprehensive kits you can purchase but you can of course choose to purchase these elements individually. See our “Specifications” tab for more details.

The DrySyn SnowStorm MULTI Starter Kit is a handy kit for unattended operation of up to 3 reaction flasks in parallel with active temperature control of your chemistry from ambient to -30 °C via connection to your chosen refrigerated/heating circulator. This kit is also suitable for heated reactions, providing additional flexibility.
The parallel reaction opportunity combined with the small benchtop footprint allows you to increase throughput without taking up valuable fume hood space which is always at a premium.
This new DrySyn SnowStorm MULTI Starter Kit comes with cooling blocks to suit 25 mL, 50 mL and 100 mL round bottom flasks, with one of each size insert supplied in addition to the DrySyn SnowStorm MULTI base.
If you require further inserts then perhaps consider one of our other useful kits or select individual inserts. You may also choose additional M16 fittings.
All DrySyn are manufactured in the UK and are fully recyclable. They are engineered from solid aluminium and have a chemically resistant anodised finish.

The DrySyn Chilli Block System is modular in design and suitable for both heating and cooling. The Chilli Block base easily attaches to most laboratory heating cooling circulators and its low profile allows the fitment onto robotic platforms but, if preferred, it can also be used as a stand-alone system.
DrySyn Chilli Block has interchangeable blocks for tubes, vials and plates but bespoke sizes are also available. The tube plate also gives you effective cap holding for Eppendorf tubes.
The Chilli Block tube blocks are manufactured in Britain from chemically resistant, anodised Aluminium. They are not just designed to be used on the active heating/cooling plate but can be used as a stand-alone platform with an ice bath or even simply pre-cool them for use directly on the lab bench.
The Chilli Block cooling base uses state of the art insulation to ensure optimum performance, temperature homegeneity and to reduce ice formation.

Maximise your budget with the Asynt & Fluorochem laboratory starter kits!
Each starter kit provides an excellent, cost effective, source for commonly used laboratory consumables (TLC plates, silicagel, deuterated solvents, NMR tubes and magnesium sulphate) with the added advantage of a much cleaner, safer and oil free lab utilising the DrySyn heating block system.
Working together in a symbiotic relationship, this collaboration between Asynt & Fluorochem can help you furnish your laboratory, supply equipment, chemicals and any consumables you may require.
Two packages available to choose from:
• AFP11014 – DrySyn MULTI Fluorochem Package
•AFP21014 – DrySyn PARALLEL Fluorochem Package