It has a capacity for four tubes of 8”, 6”, trace, and 28 “finger” tubes. Versatile and practical, it is the better option out of all the centrifuges for oil applications.

Features:
They are designed for oil/petrol applications according to the standards: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. Fits Babcock bottles.
Tubes upright on rest.
Gas Release System (GRS): Gas release system (optional); pre-installation included.
TFT color touch screen, visible from more than 3 m.:
• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalanced location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay para programar el momento en el que ha de comenzar el ciclo.
• Linked program: enlaza hasta 8 programas consecutivos sin intervención del usuario.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages warn the user of the device’s situation.

The most affordable option in the range of centrifuges for oil laboratories that, due to regulations, do not require heating. It has the same accessories as the heated models; all of them are specially designed for working with oily substances, as well as the reagents used in regulations applicable to oil.
Practical, quick, and versatile, allowing you to work with 6” and 8” conical profile tubes, pear-type tubes, and “finger” type tubes for small volumes. It has a pre-installation for incorporating a gas release system at any time during the life of the equipment.

Features:
They are designed for oil/petrol applications according to the standards ASTM D 91, D 893, D 2273, D 2709, D 5546, API 2542, API 2548, BS 4385, and DIN 51793.
Tubes upright on rest.
Gas Release System (GRS): Gas release system (optional); pre-installation included.
TFT color touch screen, visible from more than three m.:
• Shows RPM and RCF, time, acceleration/deceleration values (PCBS), and unbalance location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec to 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device’s situation.

The largest of our centrifuges for oil, with a capacity for eight tubes of 8”, is the best option for centers that carry out a large number of tests every day.

Features:
They are designed for oil/petrol applications according to the standards: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. Fits Babcock bottles.
Tubes upright on rest.
Gas Release System (GRS): Gas release system (optional); pre-installation included.
TFT color touch screen, visible from more than three m.:
• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalanced location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• The unbalanced location system indicates the batch number on the screen, which produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device’s situation.

The plasma concentration processes to obtain from fibrin clot to platelets using PRP (platelet-rich plasma) techniques, PRF (platelet-rich fibrin), and derivatives make the Plasma 22 centrifuge indispensable. The simplicity of these processes erroneously gives the impression that the technique’s performance is not affected by the centrifugation process. Nothing could be more wrong; maximum performance will only be obtained with equipment that has been validated and in which the operational parameters, beyond RPM, RCF, and time, have been calculated for these processes. The Plasma 22 centrifuge has been developed together with experts in developing these techniques and has approval for its development.
It maintains the cell structure of the phases for applying each alternative, ensuring its efficacy in the destination environment and avoiding interference of particles that impede adhesion.

Features:
LCD screen:
• Shows RPM, RCF, time, and acceleration/deceleration (PCBS).
• Speed programming in 10 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 5 sec to 99 min. Programmable in 5 sec. Steps and hold position.
• PCBS: Progressive controlled braking system with up to 175 selectable ramps that prevent sample homogenization after separation.
• 16 programmable memories.
• Several acoustic and visual messages show the user the device’s situation.

It is an essential tool for fat processing, where we can find the highest concentration of stem cells for liposculpture techniques and reparative surgery.

Features:
Available rotors for tubes (check Digtor 22 accessories).
TFT color touch screen, visible from more than 3 m.:
• Shows RPM and RCF, time, acceleration/deceleration values (PCBS), and unbalance location system (ULS).
• Speed programming in 10 RPM/ 10 xg steps
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: Unbalance location system indicates the bucket number on the screen, which produces the unbalance switch off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 40 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device's situation.

Our cytocentrifuge is designed for the concentration of biological samples on a visible surface for the microscope and its subsequent identification and characterization. Its accessories, provided with the REI system (Rotor Easy to Install), are securely installed on the rotor without needing tools and are unlocked by simply removing them from their position.
For improved traceability, it has a connectivity system that allows users to consult, program, and control the centrifuge from their chosen device: PC, tablet, or mobile phone, thanks to the free Ortoalresa SmartConnect app. Connect it to your laboratory’s WiFi network, and you will ultimately control your equipment from our app. (+ info on page 58).
It is easy to handle and reduces operating time, an indispensable feature in oncology, cytology, and microbiology services.

Features:
• Sealed holders, which prevent the leak of the sample, are easy to use.
• Fast identification of microorganisms.
• Allows cell detection even in low-concentrated liquids.
• Processing time • Alarm to prevent the drying of the samples every 20 seconds.
• Available rotors for tubes (check Digicen 22 accessories, pag. 56-57 of the general catalog)

TFT color touch screen:
• Shows RPM and RCF, time, and acceleration/deceleration values (PCBS)
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages showing the situation of the device to the user.

The centrifuge Lacter has been designed for handling dairy products such as milk, cheese, cream, and yogurt and its derivates efficiently and accurately.
Its design allows it to process Gerber or solubility tubes. It has 16 programs that will enable storing parameters to analyze samples of different types of animals, reducing the processing time.
The smooth operation prolongs the tube’s life and prevents its breakage. The simultaneous and automatic conversion of RPM/FCR values eliminates additional calculations, and the heating system ensures temperature traceability throughout the process.

Features:
Heated: working temperature up to 80 °C (176 °F).
LCD screen:
• Shows RPM, RCF, time, temperature, and acceleration/deceleration (PCBS).
• Speed programming in 10 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 5 sec. To 99 min. Programmable in 5 sec. Steps and hold position.
• PCBS: Progressive controlled braking system with up to 175 selectable ramps that prevent sample homogenization after separation.
• 16 programmable memories.
• Several acoustic and visual messages show the user the device’s situation.

Small, compact, and ideal for applications in veterinary laboratories where the number of samples is small and different types of tubes need to be processed simultaneously. It has a rotor for microtubes and capillary tubes in the same cycle.

Features:
Multitubes rotor that allows spin capillary tubes and microtubes in the same run.
LED screen:
• Shows RPM/ RCF and time.
• Speed programming in 50 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 to 99 min. Programmable in 1 min. Steps and hold position.
• Acceleration and deceleration control are done in 3 steps: fast, soft, and accessible.
• Acoustic and visual messages on the screen showing the equipment status to the user.