Your centrifuge is the most demanding laboratory. Compact, quick, reliable, and with precise control of operating parameters. Indispensable in separation processes for microvolumes, in which the relative centrifugal force must be high. The Minicen centrifuge includes a rotor for twelve 1.5-2 ml. tubes, able to reach 15,000 RPM and up to 15.596 xg. You are also supplied with reducers for 0.5-0.6 ml. and 0.2-0.4 ml. tubes, thus covering equipment for all microtubes.
The smallest in the family, offering the performance of the biggest ones.

Features:
Small footprint: 5 kg. Of weight.
LCD screen:
• Shows RPM/ RCF, time, rotor spinning, and lid status.
• Speed programming in 100 RPM/100 xg steps.
• Timer from 30 sec. to 999 min. Programmable in 1 sec. Steps or hold position.
• Timer with a countdown at a set time.
• Several acoustic and visual messages show the user the device's situation.

The new Microcen 24 emerges as the solution for all laboratories looking for high performance and versatility in a small centrifuge. It allows work with up to 8 conical tubes of 15 ml and other configurations, as its available rotors can be exchanged easily.
This equipment includes a rotor with a capacity for eight tubes of 15 ml. round bottom and has an optional range of rotors and adapters.

Features:
LCD screen:
• Shows RPM/ RCF and time.
• Speed programming in 50 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 to 99 min. Programmable in 1 min. Steps and hold position.
• Acceleration and deceleration control are done in 3 steps: fast, soft, and accessible.
• Acoustic and visual messages on screen showing the user the status of the equipment.

One of the best options when high speed and different tube formats are required. This refrigerated microcentrifuge, which has a wide range of rotors for a cooled centrifuge, can work with conical type tubes from 0,2 ml. to 15 ml. Dynamic cooling equipment keeps the desired temperature, reaching it in a short period and maintaining it stable throughout the whole cycle, regardless of the operation speed. Customization of equipment options through the software enables you to adapt the work cycles to the process and user preferences, thus optimizing performance in your laboratory.
For Ortoalresa, the Biocen 22 R centrifuge is the culmination of its know-how in centrifugation. It materialized for the user in a robust, versatile, and efficient piece of equipment that integrates perfectly into any lab, highlighting its application in research and biotechnology.

Features:
LCD screen:
• Shows RPM, RCF, time, temperature, and acceleration/deceleration (PCBS).
• Speed programming in 10 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 5 sec. To 99 min. Programmable in 5 sec. Steps and hold position.
• PCBS: Progressive controlled braking system with up to 175 selectable ramps that prevent sample homogenization after separation.
• 16 programmable memories.
• Several acoustic and visual messages show the user the device’s situation.

The Biocen 22 centrifuge is our offer for users requiring a microcentrifuge with possible applications for microhematocrit and microtubes. Its small size, good performance, and versatility make it an essential tool. It gives the user complete control from the beginning of the process, and many values can be customised according to the processes and built to ensure the minimum temperature increase inside the chamber due to the high-speed centrifugation process.
We know how vital a sample is as a part of a process, and therefore, we try to interfere as little as possible to avoid interference and ensure a precise, exact, reliable, and rapid result.

Features:
LCD screen:
• Shows RPM/ RCF and time.
• Speed programming in 50 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 to 99 min. Programmable in 1 min. Steps and hold position.
• Acceleration and deceleration control are done in 3 steps: fast, soft, and accessible.
• Acoustic and visual messages on screen showing the user the status of the equipment.

The bioprocessing requires a versatile centrifuge that covers different assays and, therefore, various configurations for the same centrifuge. The centrifuge Bioprocen 22 R provides high-speed rotors for microtubes from 1,5 to 5 ml and 50 ml conical tubes. Its accessories for microplates offer the chance to spin in swing-out rotors.
The refrigeration system has been designed for temperature stability, allowing it to be kept even at high speed while running.
The different options for customization through the software make the centrifuge a tailor-made tool for your lab. Increase your lab output with the new Bioprocen 22 R.

Features:
LCD screen:
• Shows RPM, RCF, time, temperature, and acceleration/deceleration (PCBS).
• Speed programming in 10 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “s “t” RPM/“RCF” for rep” oducible tests.
• Timer from 5 sec. To 99 min. Programmable in 5 sec. Steps and hold position.
• PCBS: Progressive controlled braking system with up to 175 selectable ramps that prevent sample homogenization after separation. 16 programmable memories.
• Several acoustic and visual messages show the user the device’s device.

The word that best defines and determines its characteristics is, without doubt, universal. It has multiple rotors with a wide range of reducers, which enables it to work with volumes from 0.2 ml. to 100 ml., with angle fixed and swing-out options. This equipment covers all users’ needs and offers a range of medium speeds for routine processes. To optimize the performance of the equipment in this range, we have increased its capacity with a swing-out rotor for up to 28 x 15 ml. tubes and an angle-fixed rotor for 32 to 15 ml./15 ml. conical tubes.
It has a control that defines the functions beyond the operation values, thus becoming a piece of equipment perfectly integrated into your processes. Versatile, functional, simple, and indispensable in your lab.

Features:
LCD screen:
• Shows RPM/ RCF and time.
• Speed programming in 50 RPM/ 10 xg steps.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 to 99 min. Programmable in 1 min. Steps and hold position.
• Acceleration and deceleration control are done in 3 steps: fast, soft, and accessible.
• Acoustic and visual messages on screen showing the user the status of the equipment.

Universal by design. With a wide range of rotors for microplates, cryotubes, microtubes, and tubes from 100 ml., with options as versatile as con 28 x 15 ml. tubes in a swing-out rotor and 32 x 15 ml. conical tubes in an angle fixed rotor, and rotors for high speed 85 ml., 80 ml., 50 ml., 30 ml. and 10 ml. tubes. Its accessories, provided with the REI system (Rotor Easy to Install), are securely installed on the rotor without needing tools and are unlocked by simply removing them from their position.
We have a device with which we can process a wide range of samples, offering the most exhaustive control of the equipment; thanks to the free Ortoalresa SmartConnect application, you can consult, program, and control the centrifuge from the device of your choice, PC, tablet and mobile phone.
Connect it to your lab’s WiFi network, and you will have complete control of your equipment from our app (+ info on page 58).

Features:
TFT color touch screen:
• Shows RPM and RCF, time, and acceleration/deceleration values (PCBS)
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages showing the situation of the device to the user.

Versatility fused with effectiveness. The centrifuge Digicen 22 R has a wide range of angle fixed rotors, both for low revolutions, with capacity up to 32 tubes of 15 ml./15 ml. conical, and for microtubes, cryotubes and high speed tubes. For the swing out versions, it has rotors for 4 tubes of 100 ml. and up to 28 positions for 15 ml. tubes. All its rotors are provided with the REI system (Rotor Easy to Install), which allows them to be securely installed on the rotor without the need for tools, and to be unlocked by simply removing them from their position.
Its powerful refrigeration system allows it to keep the minimum chamber temperature below 4°C regardless of the type of rotor and the selected speed.
For improved traceability, it has a connectivity system that allows the user to consult, programme and control the centrifuge from the device of their choice; PC, tablet and mobile phone thanks to the free Ortoalresa SmartConnect app.
Just connect it to your laboratory’s WiFi network and you will have complete control of your equipment from our app.

Features:
TFT color touch screen:
• Shows RPM and RCF, time, temperature and acceleration/deceleration values (PCBS)
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on screen based on accessories configuration.
• Count up/down from “0” or at “set RPM/RCF” for reproducible tests.
• Timer from 1 sec. to 99 hours programmable in 1 sec. steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
• 100 programmable memories, with protection under password.
• Several acoustic and visual messages showing the situation of the device to the user.

An excellent centrifuge, compact, high capacity, and with the advantages of equipment in superior segments. The type of control provided, through its TFT colour touch screen, provides the user with features that enable, in addition to the power of the equipment by operating parameters, the possibility to export the data for subsequent analysis and future operation programming. The autonomy this equipment provides enables the user to optimize working time in the lab by automating cycles and modes of operation. These features also ensure process traceability and that no parameter is uncontrolled.
The same as the rest of Ortoalresa centrifuges, it is designed to be versatile. Therefore, it has swing-out rotors with volumes of 400 ml. per bucket, rotors for microplates 80 mm height, angle fixed rotors for high speed and microtubes, and a wide range of adaptors.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, acceleration/deceleration values (PCBS), and unbalancing location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device’s situation.

An excellent refrigerated centrifuge, compact, high capacity, and with the advantages of equipment in superior segments. Its TFT color touch screen provides the user with features that enable, in addition to the control of the equipment by operating parameters, the possibility to export the data for subsequent analysis and programming for future operations. Like the rest of Ortoalresa centrifuges, it’s designed to be versatile. Therefore, it has swing-out rotors with volumes of 400 ml. per bucket, rotors for microplates of 80 mm height, angle-fixed rotors for high speed and microtubes, and a wide range of adaptors.
The autonomy this equipment gives the user optimizes the laboratory routine by personalizing the work cycles. These particularities also ensure process traceability and that no parameter is uncontrolled. Its refrigeration system allows it to maintain the minimum temperature of the chamber below four °C regardless of the type of rotor and the speed selected.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS), and unbalanced location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits the linking of up to 8 consecutive programs without the need for user intervention
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device’s situation.

Benchtop centrifuge with large capacity and high permanence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angles are fixed and swing-out. It has more than 50 different adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high-speed equipment, resulting in routine use of centrifuge with specific characteristics of superior-level models. Its color TFT touch screen offers perchance that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.
The autonomy this equipment provides enables the user to optimize working time in the lab by automating cycles and modes of operation. These features also ensure process traceability and that no parameter is uncontrolled.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, acceleration/deceleration values (PCBS), and unbalance location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device’s situation.

The largest of our refrigerated benchtop centrifuges that offers the maximum permanence. It has an ergonomic design that enables easy loading of the rotor and traceability of the position of the samples for easy identification of the charge balance. It has a wide range of accessories that offer capacity for tubes of 750 ml., microplates, microtubes, and a significant number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml.
Its color TFT touch screen offers perchance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy this equipment gives the user reduces the work time by automating the cycles and work modes, ensuring the process’s traceability. It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS), and unbalanced location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages showing the device situation to the user.

The largest of our benchtop machines, with a capacity of up to 4 liters and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples to balance the load and for easy identification. It has a wide range of accessories with a capacity for four 1.000 ml. bottles, microplates, microtubes, and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.
Its color TFT touchscreen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer-programmed operation. The autonomy provided by this equipment facilitates the automation of work cycles and modes. This also ensures the traceability of the process, not leaving any parameters uncontrolled and maintaining the process at all times.
It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS), and unbalanced location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec to 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages show the user the device’s situation.

As floor-standing equipment, Magnus 22 offers the maximum perchance for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of functional space. Its ergonomic design allows easy access to the rotor, traceability of the positioning to balance the load, and easy identification. Its color TFT touch screen offers perchance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates the automation of work cycles and modes. This also ensures the traceability of the process, not leaving any parameter uncontrolled.
It has a wide range of accessories for 750 ml. tubes, microplates, microtubes, and many positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical applications.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, acceleration/deceleration values (PCBS), and unbalance location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages showing the user situation of the device.

The refrigerated version of our floor-standing equipment offers the maximum persistence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of functional space. Its ergonomic design allows easy access to the rotor, traceability of the positioning to balance the load, and easy identification.
With a wide range of accessories that offer capacities for tubes of 750 ml., microplates, microtubes, and a significant number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml. for clinical applications. It also has a specific rotor for blood bags and tube extraction. Its powerful refrigeration system enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected. This characteristic gives the user confidence in traceability during the centrifugation cycle.

Features:
TFT color touch screen, visible from more than 3 m:
• Shows RPM and RCF, time, acceleration/deceleration values (PCBS), and unbalance location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on the screen based on accessories configuration.
• Count up/down from “0” or “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. To 99 hours programmable in 1 sec. Steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevent sample homogenization after separation.
• ULS: The unbalanced location system indicates on the screen the number of the bucket that produces the unbalanced switch-off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits linking up to 8 consecutive programs without user intervention.
• 100 programmable memories, with protection under a password.
• Several acoustic and visual messages showing the user situation of the device.